|Place of Origin:||Suzhou,China|
|Minimum Order Quantity:||1 set|
|Packaging Details:||Normal exported wooden case|
|Delivery Time:||2 months after received down payment|
|Payment Terms:||L/C, T/T, Western Union, MoneyGram|
|Operate Pressure:||1-10 Bar(adjustable)||Raw Material:||Methanol|
Methanol Production Plants,
99%-99.9999% Purity Methanol Cracking Hydrogen Generation Unit
1. Production Scale:50~5000Nm3/h
2. Product Purity:99%~99.9995% (v/v)
4. Pressure: 0.8~2.5MPa(G)
Beside endothermic gas or endo gas, more and more methanol is used for the thermal treatment of metals as
a protective gas. The methanol is
directly insirted into the furnace and cracked there.
CH3OH → CO + 2 H2
Carbon monoxid and hydrogen are formed. The methanol cracking gas is an excellent carrier gas.
Hydrogen and carbon monoxide are reducing agents and avoid oxidation or corrosion of metal surfaces in a
furnace. It has to be taken into account
however, that carbon monoxid increases the carbon content of steel. Methanol cracking gas can therefore be
used for surface hardening of steel by
carbonisation or carburization. Carbon concentration can be increased up to the saturation level of austenite
in surface close areas (around 1mm
deep). In order to control the carbonization, water vapour can be added or nitrogen can be used for dilution.
1. Carbonisation, Carbonization, Carburization, Carburisation
3. Annealing of steel with high carbon content
5. Stainless steel,Cooper industry
1. Methanol is more expensive compared to Methane, however total costs for methanol cracking is
2. Lower investment costs.
3. Less energy consumption.
4. Less maintenance.
5. Stable, high efficiency
Contact Person: Jojo